Show simple item record

dc.contributor.authorIezzi, Alexandra M.
dc.date.accessioned2021-10-21T21:56:03Z
dc.date.available2021-10-21T21:56:03Z
dc.date.issued2020-08
dc.identifier.urihttp://hdl.handle.net/11122/12301
dc.descriptionDissertation (Ph.D.) University of Alaska Fairbanks, 2020en_US
dc.description.abstractInfrasound has become an increasingly popular way to monitor and characterize volcanic eruptions, especially when combined with multidisciplinary observations. Regardless of how close the infrasound instruments are to the eruption, the effects from propagation must be considered prior to characterizing and quantifying the source. In this dissertation, we focus on modeling the effects of the atmosphere and topography on the recorded infrasound waveforms in order to better interpret the acoustic source and its implications on the volcanic eruption as a whole. Alaska has 54 historically active volcanoes, one third of which have no local monitoring equipment. Therefore, remote sensing (including that of infrasound arrays) is relied upon for the detection, location, and characterization of volcanic eruptions. At long ranges, the wind and temperature structure of the atmosphere affects infrasound propagation, however, changes in these conditions are variable both in time and space. We apply an atmospheric reconstruction model to characterize the atmosphere and use infrasound propagation modeling techniques for a few recent eruptions in Alaska. We couple these atmospheric propagation results with array processing techniques to provide insight into detection capability and eruption dynamics for both transient and long-duration eruptions in Alaska. Furthermore, we explore the future implementation of this long-range infrasound propagation modeling as an additional monitoring tool for volcano observatories in real time. The quantication of volcanic emissions, including volume flow rate and erupted mass, is possible through acoustic waveform inversion techniques that account for the effects of propagation over topography. Previous volcanic studies have generally assumed a simple acoustic source (monopole), however, more complex source reconstructions can be estimated using a combination of monopole and dipole sources (multipole). We deployed an acoustic network around Yasur volcano, Vanuatu, which has eruptions every 1-4 minutes, including acoustic sensors along a tethered aerostat, allowing us to better constrain the acoustic source in three dimensions. We find that the monopole source is a good approximation when topography is accounted for, but that directionality cannot be fully discounted. Inversions for the dipole components produce estimates consistent with observed ballistic directionality, though these inversions are somewhat unstable given the station conguration. Future work to explore acoustic waveform inversion stability, uncertainty, and robustness should be performed in order to better estimate and quantify the explosion source. Volcanic explosions can produce large, ash-rich plumes that pose great hazard to aviation. We use a single co-located seismic and infrasound sensor pair to characterize 21 explosions at Mount Cleveland, Alaska over a four-year study period. While the seismic explosion signals were similar, the acoustic signals varied between explosions, with some explosions exhibiting single main compressional phase while other explosions had multiple compressions in a row. A notable observation is that the seismo-acoustic time lag varied between explosions, implying a change in the path between the source and receiver. We explore the influence of atmospheric effects, nonlinear propagation, and source depth within the conduit on this variable seismo-acoustic time lag. While changes in the atmospheric conditions can explain some of the observed variation, substantial residual time lags remain for many explosions. Additionally, nonlinear propagation does not result in a measurable difference for the acoustic onset. Therefore, using methods such as seismic particle motion analysis and cross correlation of waveforms between events, we conclude that varying source depth within the conduit likely plays a key role in the observed variation in the seismo-acoustic time lags at Mount Cleveland.en_US
dc.description.sponsorshipNational Science Foundation Grants EAR-1331084 (AMI and DF), EAR-1620576 (RSM), and EAR-1847736 (RSM), Alaska Volcano Observatory, New Zealand Strategic Science Investmenten_US
dc.description.tableofcontentsChapter 1: General introduction -- Chapter 2: Application of an updated atmospheric model to explore volcano infrasound propagation and detection in Alaska -- Chapter 3: Three-dimensional acoustic multipole waveform inversion at Yasur Volcano, Vanuatu -- Chapter 4: Seismo-acoustic characterization of Mount Cleveland Volcano explosions -- Chapter 5: general Conclusionsen_US
dc.language.isoen_USen_US
dc.subjectVolcanic eruptionsen_US
dc.subjectInfrasonic wavesen_US
dc.subjectInfrasonic wave detectionen_US
dc.subject.otherDoctor of Philosophy in Geophysicsen_US
dc.titleExploring infrasound wavefields to characterize volcanic eruptionsen_US
dc.typeDissertationen_US
dc.type.degreephden_US
dc.identifier.departmentDepartment of Geosciencesen_US
dc.contributor.chairFee, David
dc.contributor.committeeTape, Carl
dc.contributor.committeeWest, Michael
dc.contributor.committeeIzbekov, Pavel
dc.contributor.committeeHaney, Matthew
refterms.dateFOA2021-10-21T21:56:03Z


Files in this item

Thumbnail
Name:
Iezzi_A_2020.pdf
Size:
11.82Mb
Format:
PDF
Description:
Thesis
Thumbnail
Name:
Chapter_2_Supplemental_Documen ...
Size:
1.669Mb
Format:
Microsoft Word 2007
Description:
Chapter 3 Supplemental Document
Thumbnail
Name:
Chapter_2_Supplemental_GIF.gif
Size:
5.094Mb
Format:
GIF image
Description:
Chapter 2 Supplemental Gif
Thumbnail
Name:
Chapter_3_Supplemental_Document.pdf
Size:
156.6Kb
Format:
PDF
Description:
Chapter 3 Supplemental Document
Thumbnail
Name:
Chapter_4_Supplemental_Document.pdf
Size:
939.3Kb
Format:
PDF
Description:
Chapter 4 Supplemental Document

This item appears in the following Collection(s)

Show simple item record