Browsing College of Engineering and Mines by Subject "communication"
Now showing items 1-1 of 1
Retrodirective phased array antenna for nanosatellitesThis thesis presents a S-band phased array antenna for CubeSat applications. Existing state-of the-art high gain antenna systems are not well suited to the majority of CubeSats, those that fall within the 1U (10 cm x 10 cm x 10 cm) to 3U (10 cm x 10 cm x 30 cm) size ranges and in Low Earth Orbit (LEO). The system presented in this thesis is designed speciﬁcally to meet the needs of those satellites. This system is designed to ﬁt on the 1U face (10 cm x 10 cm) of a CubeSat and requires no deployables. The use of beamforming and retrodirective algorithms reduces the pointing requirements of the antenna, easing the strict requirements that high gain antennas typically force on a CubeSat mission. Additionally, this design minimizes volume and uses low cost Commercial-oﬀ-the-Shelf (COTS) parts. This thesis discusses the theoretical background of phased array theory and retrodirective algorithms. Analysis are presented that show the characteristics and advantages of retrodirective phased antenna systems. Preliminary trade studies and design analyses show the feasibility and expected performance of a system utilizing existing COTS parts. The preliminary analysis shows that an antenna system can be achieved with ≥8.5 dBi of gain, 27dB of transmitted signal gain, 20% Power Added Eﬃciency (PAE) within a 1 W to 2 W power output, and an 80° eﬀective beamwidth. Simulation results show an example antenna array that achieves 8.14 dBi of gain and an 82° eﬀective beamwidth. Testing results on a prototype of the front-end electronics show that with minimal calibration, the beamforming and scanning error can be reduced to 5°. The power consumption and signal gain of the electronics is also veriﬁed through testing. The CubeSat Communications Platform, a CubeSat mission funded through the Air Force Research Laboratory is in Phase A design to demonstrate this antenna system, along with other experimental payloads. This thesis includes a discussion of interface control, mission requirements, operations, and a recommended experiment sequence to test and verify the antenna system on orbit.