• Characterization of Alaskan Hot-Mix Asphalt containing Reclaimed Asphalt Pavement Material

      Liu, Jenny; Zhao, Sheng; Li, Lin (Center for Environmentally Sustainable Transportation in Cold Climates, 2016-06)
      In order to properly characterize Alaskan HMA materials containing RAP, this study evaluated properties of 3 asphalt binders typically used in Alaska, PG 52-28, PG 52-40, and PG 58-34, and 11 HMA mixtures containing up to 35% RAP that were either produced in the lab or collected from existing paving projects in Alaska. Various binder and mixture engineering properties were determined, including true high binder grades, complex modulus (|G*|), and phase angle (δ) at high performance temperatures, MSCR recovery rate and compliance, BBR stiffness and m-value, DTT failure stress and strain for binders, and dynamic modulus, flow number, IDT creep stiffness and strength for mixtures. Binder cracking temperatures were determined through Thermal Stress Analysis Routine (TSAR) software along with BBR and DTT data. Mixture cracking temperatures were determined with IDT creep stiffness and strength data. It was found that rutting may not be a concern with Alaskan RAP mix, while low-temperature cracking concerns may still exist in RAP mix in Alaska. A savings of $13.3/ton was estimated for a 25% RAP mix, with consideration of Alaskan situations. Many recommendations for future RAP practice and research are recommended based on testing results and cost analysis.
    • Continued Field Evaluation of Precutting for Maintaining Asphalt Concrete Pavements with Thermal Cracking

      Liu, Jenny; Zhao, Sheng; McHattie, Robert (Center for Environmentally Sustainable Transportation in Cold Climates, 2017-08)
      In continuation of a previously completed project entitled Evaluate Presawn Transverse Thermal Cracks for Asphalt Concrete Pavement, this project was a further effort to understand important variables in the thermal cracking process through continued field monitoring of three precutting test sites in Interior Alaska. The test sites included (1) Phillips Field Road, precut in 1984 (≈ west ¼ mile of this road), (2) Richardson Highway precut in 2012 (≈ MP 343–344), and (3) Parks Highway precut in 2014 (≈ MP 245–252). Preliminary results at relatively short periods (up to 4 years) indicate that precutting is an economically promising way to control natural thermal cracks. Even short-term economic benefits appear to range between about 2% and 21%. The degree to which precutting works for an AC pavement appears to be a function of the thickness and general structural robustness of new construction. Shorter precut spacing, along with stronger and/or thicker pavement structures, looks promising with respect to crack control. Continuing evaluation and monitoring of test sections are needed to recommend an effective design methodology and construction practice for Alaska and cold areas of other northern states.
    • Performance of TenCate Paving Interlayers in Asphalt Concrete Pavements

      Liu, Jenny; Zhao, Sheng; Li, Lin (Center for Environmentally Sustainable Transportation in Cold Climates, 2017-08)
      As a continued effort of a previously completed project entitled “Performance of TenCate Mirafi PGM-G4 Interlayer-Reinforced Asphalt Pavements in Alaska,” this project evaluated two newly modified paving interlayers (TruPave and Mirapave) through overlay, dynamic modulus tests and low-temperature performance tests. A field survey was conducted to further evaluate the performance of three paving interlayers (G4, G50/50, and G100/100) applied to field sections constructed in May 2013 at Milepost 148–156 Richardson Highway in Alaska. Overlay test results indicate that asphalt concrete (AC) with paving interlayers (TruPave and Mirapave) shows lower reduction in peak load, suggesting better cracking resistance. The dynamic modulus measurement of AC with paving interlayers reveals more rational results from the IDT mode test than the AMPT method due to similar stress conditions in the paving interlayer. With paving interlayers, the temperature sensitivity and cracking potential of AC material were reduced according to the results from the IDT creep test. Field survey results confirm that all sections reinforced with paving interlayers (G4, G50/50, and G100/100) had better cracking resistance than the control section.