Browsing Community Center for Environmentally Sustainable Transportation in Cold Climates (CESTiCC) Publications by Subject "fly ash"
Now showing items 1-3 of 3
Environmentally Friendly Pervious Concrete for Treating Deicer-Laden Stormwater: Phase IA graphene oxide-modified pervious concrete was developed by using low-reactivity, high-calcium fly ash as sole binder and chemical activators and other admixtures. The density, void ratio, mechanical strength, infiltration rate, Young’s modulus, freeze-deicer salt scaling, and degradation resistance of this pervious concrete were measured against three control groups. The test results indicate that graphene oxide modified fly ash pervious concrete is comparable to Portland cement pervious concrete. While the addition of 0.03% graphene oxide (by weight of fly ash) noticeably increased the compressive strength, split tensile strength, Young’s modulus, freeze-deicer salt scaling, and degradation resistance of fly ash pervious concrete, it reduced the void ratio and infiltration rate. The fly ash pervious concrete also showed unfavorable high initial loss during the freeze-deicer salt scaling test, which may be attributed to the low hydration degree of fly ash at early age. It is recommended that durability tests for fly ash concrete be performed at a later age.
Environmentally Friendly Pervious Concrete for Treating Deicer-Laden Stormwater: Phase IIIn Phase I of this project, graphene oxide (GO)-modified pervious concrete was developed using coal fly ash as the sole binder. The primary objectives of Phase II of this project were (1) to evaluate the stormwater infiltration capacity of GO-modified fly ash pervious concrete; (2) to evaluate the durability performance of GO-modified fly ash pervious concrete using freeze/thaw and salt resistance testing methods; and (3) to use advanced analytical tools to fully characterize the GO-modified fly ash binder. Test results indicate different degrees of reduction in concentrations of possible pollutants in stormwater—copper, zinc, sulphate, chloride, ammonia, nitrate, and total phosphate. The incorporation of GO significantly improved the resistance of pervious concrete to freeze/thaw cycles and ambient-temperature salt attack. The specimens were examined using X-ray diffraction, which revealed that the mineralogy and the chemical composition of fly ash pastes differ considerably from those of cement pastes. Nuclear magnetic resonance was used to study the chemical structure and ordering of different hydrates, and provided enhanced understanding of the freeze/thaw and salt scaling resistance of fly ash pervious concrete and the role of GO.
A Targeted Approach to High-Volume Fly Ash Concrete Pavement (Phase I)Unlike the conventional method of admixing nanomaterials directly in fresh concrete mixture, a more targeted approach was explored. Specifically, nanomaterials were used to improve the interface between coarse aggregate and cement paste, by coating the coarse aggregate with cement paste that contained graphene oxide or nanosilica. Using coated coarse aggregates, the mechanical and transport properties of high-volume fly ash (HVFA) concrete were tested to evaluate the effect of nanomaterial coating on the interface transition zone of concrete. The compressive and splitting strengths of HVFA concrete at 3, 7, 14, and 28 days and the water sorptivity and chloride migration coefficient at 28 days were studied. Results show that nanomaterial-coated coarse aggregate can improve the transport properties of HVFA concrete by reducing permeability. However, no improvement was seen in the compressive and splitting strengths when incorporating coated coarse aggregate, compared with direct mixing of nanomaterials in fresh concrete. Resistance to freezing/thawing cycles and scanning electron microscope/energy dispersive X-ray spectroscopy of concrete samples were also investigated to obtain a more comprehensive and mechanistic understanding of nanomaterial coating.