Browsing College of Engineering and Mines (CEM) by Subject "Paving interlayer"
Now showing items 1-1 of 1
Performance of TenCate Paving Interlayers in Asphalt Concrete PavementsAs a continued effort of a previously completed project entitled “Performance of TenCate Mirafi PGM-G4 Interlayer-Reinforced Asphalt Pavements in Alaska,” this project evaluated two newly modified paving interlayers (TruPave and Mirapave) through overlay, dynamic modulus tests and low-temperature performance tests. A field survey was conducted to further evaluate the performance of three paving interlayers (G4, G50/50, and G100/100) applied to field sections constructed in May 2013 at Milepost 148–156 Richardson Highway in Alaska. Overlay test results indicate that asphalt concrete (AC) with paving interlayers (TruPave and Mirapave) shows lower reduction in peak load, suggesting better cracking resistance. The dynamic modulus measurement of AC with paving interlayers reveals more rational results from the IDT mode test than the AMPT method due to similar stress conditions in the paving interlayer. With paving interlayers, the temperature sensitivity and cracking potential of AC material were reduced according to the results from the IDT creep test. Field survey results confirm that all sections reinforced with paving interlayers (G4, G50/50, and G100/100) had better cracking resistance than the control section.